Analogis 6085 Brush 1 - brush for vinyls

Flat cleaning brush for LP records with carbon fibre and anti-static effect

With this anti-static brush you can gently, quickly and effectively clean dust and dirt from your precious vinyl records. The carbon fibers are conductive and fine enough to penetrate deep into the grooves and get rid of most dirt. The conductivity of thousands of fibers also helps discharge static charge, eliminating cracking during playback. By regularly cleaning the grooves of the turntable record, it delivers a better sound experience while extending the life of the stylus and record.

CLEANING PROCEDURE

1) Place the phono record on the turntable and turn on the turntable rotation.

2) Hold the brush horizontally with the record by the aluminum handle and gently press the bristles of the brush against the grooves of the record. (Be careful that only the carbon fibers of the brush touch the grooves.)

(For increased effectiveness, we recommend lightly dampening the brush bristles with Analogis STATIC CLEANER 6075 cleaning and anti-static solution before placing them on the record.)

3) While rotating the brush, slowly pull the brush towards you, trying to pick up any dirt (see picture above). Allow the turntable to spin once or twice until all dust and dirt is captured by the brush bristles.

4) Repeat the above procedure before playing each side of the record, and between cleanings, remove the brush from thebrush by rotating the plastic brush cover around the bristles one or more times.

Remark:

Do not touch the carbon fiber bristles or subject them to undue pressure, tension or bending.